Modern Suction Management for Clinical Environments
The VacSax FluidGuard Flexi system uses a disposable liner insert within a reusable canister — employing vacuum action to draw fluids from the surgical or endoscopy site safely into a sealed, antimicrobial liner.
The range comprises 1 litre, 2 litre and 3 litre configurations, with both standard and pre-gelled liner options — suitable for endoscopy units, operating theatres and other clinical environments across Ghana.
Ghana
Distributor
Safe
Engineered with several safety features to ensure optimal protection and minimise risk. Single patient port system prevents cross-contamination. Hydrophobic bacterial shut-off filter provides complete overflow protection.
Smart
The only system where, when in use, all external surfaces of the liner, canister and vacuum tubing have antimicrobial properties via Bacticlear® technology. Semi-rigid liner stands upright even when removed and full of fluid.
Sustainable
Designed with less plastic and efficient packaging to lower waste and reduce CO₂ emissions. The reusable canister model significantly reduces single-use plastic waste compared to fully disposable systems.
Available Products
1 litre, 2 litre and 3 litre configurations — standard and pre-gelled liners — with compatible antimicrobial canisters in V Mount, European Parallel and American Parallel configurations.
VacSax Liner Features
All VacSax liners carry the CE and UKCA mark and conform to relevant standards and regulations.
Simple Setup. Safe Disposal.
The system uses a disposable liner inside a reusable canister. Vacuum action draws fluids from the surgical site into the sealed liner — which is then safely removed and disposed of without spillage or contamination risk.
Connect the antimicrobial Bacticlear® tubing to the vacuum source and to the mount canister T junction.
Insert the folded liner in the canister — match liner/canister sizes (never mix sizes). Connect the vacuum tapered connector. Check for perfect sealing of the sample port.
Switch on the vacuum controller to its maximum setting to ensure the liner unfolds correctly and to verify the effectiveness of the vacuum action.
Connect the patient tubing to the elbow (remove the elbow when using wide bore tubing).
Proceed with the suction. Once the fluid reaches its maximum level, the overflow hydrophobic valve will automatically cease the suction process.
Carefully detach the patient tubing from the liner.
Close the patient port using the patient port plug to fully seal the liner contents.
Switch off the vacuum.
Disconnect the vacuum tapered connector from the liner.
Grasp the side handles of the liner firmly.
Lift and extract the liner from the canister. The used liner and its contents can be safely transported for disposal.
Request a Quotation for VacSax FluidGuard Flexi
Available now in Ghana through The Endoscopy People. Contact us with your canister type preference, liner size and estimated monthly volume and we will respond with pricing within 24 hours.